PTP, SyncE & TDM under control

Synchronization is the set of techniques that enable the frequency and phase of the equipment clocks in a network to remain constrained within the specified limits. Synchronization networks can have hierarchical or non-hierarchical architectures.

Networks that use hierarchical synchronization have a tree architecture. In such networks a master clock is distributed, making the rest of the clocks slaves of its signal. A network with all the equipment clocks locked to a single master timing reference is called synchronous. Our product range comprises from small handheld, battery fed testers to full featured service performance assurance tools and distributed monitoring systems. We have several product lines including:

  • PTP testers: capable to emulate and analyze the protocol.

  • Sync Ethernet testers: are ideal for the installation and troubleshooting SyncE.

  • E1 testers: permit the verification of synchronization networks based on 2Mbit/s

  • Ethernet Taps: intended to capture PTP and Ethernet protocols to analyze them.

  • WAN emulators: ideal find out the tolerance of the synchronous network under any traffic condition.


xGenius is a handheld transmission and synchronization tester equipped with multiple network interfaces and a large capacitive screen. It is light (1.9kg) and rugged. The unit is able to test Ethernet/IP networks up to 10Gb/s while supporting master/slave clock emulation and plenty of Sync-E and PTP testing facilities.



ALBEDO Ether.Genius is a multi-technology tester equipped with all the features you need to install or maintain telecom networks based on Gigabit Ethernet (GbE), Synchronous Ethernet (SyncE), E1, Datacom, PTP (IEEE 1588) and Jitter / Wander. Includes Ether.Giga, Ether.Sync and AT.One.



Zeus is a tester designed to install and maintain the communications in the power industry. It supports legacy and new generation interfaces in order to verify Ethernet / IP, PTP, SyncE, ToD, IRIG-B, T1 / E1, C37.94, RS-232, G703, GOOSE, SV or MMS, you will get a perfect vision and control of your infrastructures improving protection and data acquisition.



E1 Datacom is a rouged full-featured E1, Datacom, Jitter, Wander, Pulse Mask handheld tester designed in 2011 that provides efficient navigation and high resolution screen. Low cost, full featured, it is a truly field tool for installation, acceptance and maintenance of links and Synchronization Networks.